Design and Construction of Factories for Production of Disposable Medical Devices


 

Soft Serum Production Line


Serums are containers that house preserving or crystalloid solutions that contain electrolyte, water, and cellular nutrients and are injected through veins.
They are categorized into four types:
1. Crystalloid solutions to compensate for the reduction of fluids or electrolytes, such as ringer serum, ringer lactate, saline normal serum, sugary salty serum and sugar candy
2. Plasma replacement colloidal solutions to compensate for decreased intravascular volume such as dextran and homoxyl
3. Food solutions (replacement of intravenous nutrition) such as amino acid serum and intralipid serum
4. Solutions with special treatment such as mannitol serum
Crystalloid solutions may be used to replace electrolytes and water lost through diarrhea and vomiting. Excessive consumption causes sodium accumulation and excessive water in the body, pulmonary edema, and heart failure. Hypertonic solutions are used to treat water poisoning and increase the volume of pure water.
The production line includes: bag making machines, solvent and leak test devices, as well as the necessary autoclaves that are used to make the best raw materials.
NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.


Ventilator Tube Set Production, Packaging, and Sterilization Lines


Ventilator pushes air into the lungs through some calculations which adjust the pressure of oxygen as it enters the body. Also the speed of breathing, volume and the dose of the medicine can be changed. After the calculations the air enters the ventilator tubes and then into the lungs.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.


 

Suction Tubes and Suction Bottles


  Suction tubes are used in all areas of surgery and come under surgical instruments, dentistry instruments as well as gynecological instruments. These suction tubes are not only found in the operation room but they are also found in an ambulance in case any liquids need to be cleared away from a patient in a state of emergency. These tubes attached to suction machines are also found in clinics and hospital rooms. The suction tubes each perform a particular application which is why the suction machine has a number of suction tubes attached to it.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can
assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction



 

IV 3-way Stopcock


  Can be used with intra-arterial and intravenous systems. A red stud is placed on the device if used for arterial purposes (for blood sampling). It provides 3-way flow (from inlet to outlet, inlet to side-port or side port to outlet) by use of the handle on the top of the stopcock to open and close lines.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.



 

Surgery Clothes, Drapes, and Gowns


  Considering the constant rise in the consumption of disposable hospital clothes from non-woven fabric, NIAMSH has designed the production line for drapes, gowns, and in general surgical packs which include general, ENT, delivery, etc. The production and control plans for each pack is included in the manual of the machines.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction




 

Vacuum Blood Collection Tubes


  A Vacutainer blood collection tube is a sterile glass tube with a colored rubber stopper creating a vacuum seal inside of the tube facilitating the drawing of a predetermined volume of liquid. Vacutainer tubes may contain additives designed to stabilize and preserve the specimen prior to analytical testing. Tubes are available with a safety-engineered closure (rubber stopper), with a variety of labeling options and stopper colors as well as a range of draw volumes. The tubes might contain some chemicals to help preservation. Vacutainer needle are double ended, with one side being encased in a thin rubber coating for safety. When the needle is screwed into the translucent plastic needle holder, the rubber needle is inside the holder, and the exposed needle will be inserted into the vein. When a Vacutainer tube is inserted into the holder, its rubber cap is punctured by the inner needle and the vacuum in the tube pulls blood through the needle and into the tube. The filled tube is then removed and another can be inserted and filled the same way. The amount of air evacuated from the tube predetermines how much blood will fill the tube before blood stops flowing. NIAMSH has set up a knowledge based company to produce vacutainers in order to lower the rate of their import.

NIAMSH Company acts as a counsellor, planner, and manufacturer for your company in accordance with the orders of our customers. If you need a space to produce this product, we can create a clean room for you to meet this purpose.


 

Chest Electrode


  Electrical activity going through the heart can be measured by external skin chest electrodes. The electrocardiogram (ECG) registers these activities from electrodes which have been attached onto different places on the body. In total, twelve leads are calculated using ten electrodes. They can be used for exercise test, operating room, and monitoring. This device is disposable, and without it, the doctors cannot observe the heart rate. It is produced in two sizes, for adults and for children.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.


 

Tracheal Tube with Cuff or Cuff-less Production Line

A tracheal tube is a catheter that is inserted into the trachea for the primary purpose of establishing and maintaining a patent airway and to ensure the adequate exchange of oxygen and carbon dioxide. Many different types of tracheal tubes are available, suited for different specific applications.

Tracheal tubes can also be used to deliver oxygen in higher concentrations than found in air, or to administer other gases such as helium, nitric oxide, nitrous oxide, xenon, or certain volatile anesthetic agents such as desflurane, isoflurane, or sevoflurane.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.
 



 

Vaginal Speculums - Urine Buttles - Putri Dishes


  Speculum is a tool used to move away human body parts in order to provide a better view during examination. The most commonly used speculum is vaginal speculum but there are also nasal, rectal, ear, and mouth specula.

Vaginal Speculum: Used for examination and at times surgery on ladies’ vaginas. It is classified as a retractor device. It is usually plastic and disposable, although the metal one is not disposable.
NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.



 
Urinary Catheters Production Lines

In urinary catheterization a latex, polyurethane, or silicone tube known as a urinary catheter is inserted into a patient's bladder via the urethra. Catheterization allows the patient's urine to drain freely from the bladder for collection. It may be used to inject liquids used for treatment or diagnosis of bladder conditions. A clinician, often a nurse, usually performs the procedure, but self-catheterization is also possible. The catheter may be a permanent one (indwelling catheter), or an intermittent catheter removed after each catheterization.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.



Nasogastric Intubation Production Line


Nasogastric intubation is a medical process involving the insertion of a plastic tube (nasogastric tube or NG tube) through the nose, past the throat, and down into the stomach. The nasogastric (NG) tube is a vacuum tube. It is used when a physician desires, the stomach continuously and completely empty/evacuated of swallowed air, swallowed saliva, gastric secretions or fresh blood. It can also be used as a way of controlling or promoting feeding.
NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.

 

Bandage Set with Receivers Production and Packaging Line

A wound dressing kit for facilitating wound healing, preventing infection, preventing bleeding, helping the wound healing process, temperature insulation, maintaining wound moisture, and protecting the wound from mechanical damage. All necessary requirements for wound dressing such as bandage and gas, receiver and .... are packaged in the relevant tray.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.


 

Laryngeal Mask Production and Packaging Lines

A laryngeal mask airway — also known as laryngeal mask— is a medical device that keeps a patient's airway open during anaesthesia or unconsciousness. It is a type of supraglottic airway. A laryngeal mask is composed of an airway tube that connects to an elliptical mask with a cuff which is inserted through the patient's mouth, down the windpipe, and once deployed forms an airtight seal on top the glottis (unlike tracheal tubes which pass through the glottis) allowing a secure airway to be managed by a healthcare provider.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.

 


 

Surgical Sutures Production Line, Packaging, and Sterlization


  Surgical suture is a medical device used to hold body tissues together after an injury or surgery. Application generally involves using a needle with an attached length of thread. A number of different shapes, sizes, and thread materials have been developed over its millennia of history. Surgeons, physicians, dentists, podiatrists, eye doctors, registered nurses and other trained nursing personnel, medics, and clinical pharmacists typically engage in suturing. Surgical knots are used to secure the sutures.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.



 

Blood Bags Production, Packaging, and Sterilization


The production line includes equipment for production, extruding, printing, packaging, etc, all of which domestically made.
NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.


Feeding Tube Production Lines


A feeding tube is a medical device used to provide nutrition to patients who cannot obtain nutrition by mouth, are unable to swallow safely, or need nutritional supplementation. The state of being fed by a feeding tube is called gavage, enteral feeding or tube feeding. Placement may be temporary for the treatment of acute conditions or lifelong in the case of chronic disabilities. A variety of feeding tubes are used in medical practice. They are usually made of polyurethane or silicone.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.


IV Sets

 

  This product is used to prescribe a certain and exact volume of drugs and solutions with the use of stopcock and scalp vein.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.


 

3 Piece Syringes Production Line

Syringe in medicine is a device used to inject medicine into the body. The syringe is generally a graduated and cylindrical device with a piston at the end which pushes the drug forward and inserts the into the body tissue through sharp scarves.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.
 

Serum Set

This product is used to prescribe a certain and exact volume of drugs and solutions with the use of stopcock and scalp vein.

NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.
 



 

Amalgam Production Line


NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.

Laparoscopy Trocar Production Lines


A trocar is a medical device that is made up of an obturator (which may be a metal or plastic sharpened or non-bladed tip), a cannula (basically a hollow tube), and a seal. Trocars are placed through the abdomen during laparoscopic surgery. The trocar functions as a portal for the subsequent placement of other instruments, such as graspers, scissors, staplers, etc.
NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.


Fluff Bed Pads with Absorbent Powder Production Machine

Keeping the patient in the hospital creates both psychological problems for the sick person and financial ones for their family. By learning the basics of keeping the patient at home and obtaining the necessary materials, you can spend a lower cost and more time in the family’s warm environment. One item that you will need is the patient’s bed pad, very important on health issues and by using it you will no longer need to wash after your patient. This pad is completely healthy and with its absorbent powder absorbs all liquids, preventing it to sip into the mattress and smelling bad.
NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.

Accordion Surgical Caps


It is used in order to meet health standards in medical facilities and prevent contagion and also in order to observe health in restaurants, kitchens, hospitals, and food and pharmaceutical industries. This disposable hat is very commonly worn to prevent hair getting where it shouldn’t. Accordion cap is the most common because it fits to small sizes and is very cheap.
NIAMSH is a counsellor for investment, designer, and manufacturer for factories for this product. And if necessary, we can assist in creating clean rooms for clean rooms for this product through processes of consulting, design, and construction.